DESCRIPTION
Bilge Waater & Smoke Alarm Unit is designed to detect water and smoke. The primary purpose of this controller os to detect water that can be in boat bilges as well a smoke that may appear in the boat engine room. In case of detection, an LED will indicate light and alarm will give sound. The unit can also be used for various safety applications that are in need of water and smoke detection where it should not be present.
The main features of the equipments are:
- Easy to install - no expertise required.
- The controller opreates on 12V/24V DC source
- Easy to operate
- High Accuracy
- Compact and Portable
BILGE WATER SENSOR
When water is sensed by the sensor, the bilge LED glows and the buzzer sounds. The buzzer is reset by the switch to OFF. Once water in bilge is in SAFE level, below the sensor level, the buzzer and bilge LED does not glow. For Unit ready-Switch on the Ready switch, the READY LED glows- (to test sound functioning, press TEST push switch, sounds till push). Unit is now again ready.
SMOKE SENSOR
Once the smoke is sensed, the yellow smoke LED glows with sound. Reset sound by switching OFF and reset smoke LED glow by pressing the push switch. Once the smoke is OUT for unit ready again-Switch on thye READY switch, the READY LED glows- (to test sound functioning, press TEST push switch, sounds till push). Unit is now again ready.
